Miele DA 424 V Wartungshandbuch

Operating and installation instructionsCooker hoodDA 424 VTo avoid the risk of accidentsor damage to the applianceit is essential to read theseinstruc

Guide to the appliance10

a Cover plateb Telescopic towerc CanopyThe canopy is not designed to beused as a shelf.d Grease filterse Controlsf Hob lightingg Touch control for hob

The cooker hood works with. . . air extraction:The air is drawn in, cleaned by thegrease filters and directed outside.The cooker hood is fitted with a

To switch the fan on^Press the On/Off touch control.The fan runs at power level "II".The indicator lamp will come on.If the cooker hood has

The indicator lamps for fan power levelsI and IV will flash if the automaticswitch-off of the Intensive setting is notactivated.^Press the + touch con

To switch the lighting onThe hob lighting can be switched onand off independently of the fan.^Briefly press the lighting touchcontrol to switch on the

Reading the filter operating hourscounterTo check the percentage of time setalready used:^Press the On/Off touch control toswitch the fan on.^ Press a

The – / + control lamps show the timewhich has been set:1st lamp from the left = 20 hours2nd lamp from the left = 30 hours3rd lamp from the left = 40

,Before carrying out any cleaningor maintenance work, disconnectthe cooker hood from the mainssupply. Ensure that:– it is switched off at the isolator

ControlsThe controls may sufferdiscolouration or damage if soiling isleft on them for too long. Removesoiling straight away.Observe the General notes

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Warning and Safety instructions . . . .

Cleaning the grease filters by hand^Clean the filters with a soft nylonbrush in a mild solution of hot waterand a small amount of washing-upliquid.Do

Changing a halogen lamp^Before any cleaning or maintenancework, disconnect the cooker hoodfrom the mains supply. Ensure that–it is switched off at the

(Ceiling fixing viewed from above)1) Alternative positions for feedingthrough the mains cable2) Height range for appliance inextraction mode (the appl

,Before installation, it is importantto read the information given on thefollowing pages as well as the"Appliance dimensions" and the"W

Extending or limiting the adjustmentrangeThe height range for the appliance canbe extended or limited by moving thelimit switch.It may be necessary to

^ Loosen the top limit switch.^If a greater safety distance "S"between the canopy and the hob isrequired a, raise the canopy until therequir

All electrical work should beundertaken by a suitably qualifiedand competent person in strictaccordance with current nationaland local safety regulati

The Miele DSM 400 control module canbe used to combine the cooker hoodwith other components.It enables the following:Connection to a window contactswi

Connection to a light switchThe control module can be used toswitch on the cooker hood lighting andalso to dim it (depending on model) viaa light swit

,Important: To avoid the dangerof toxic fumes, please observe theWarning and Safety instructions.This is especially crucial when usingthe cooker hood

Disposal of the packingmaterialThe transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and

Important:If the exhaust ducting is to run throughrooms, ceiling space etc. where theremay be great variations in temperaturebetween the different are

In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee, please contact:–Your Miele Dealer / Chartered Agentor

Total connected load...455WFan motor ...200WVariable height motor ...175WHob lighting ...4x20WVoltage ...

33

34

35

Alteration rights reserved / 4309M.-Nr. 07 261 320 / 03

This appliance complies with allrelevant local and national safetyrequirements. Inappropriate usecan, however, lead to personal injuryand damage to pr

Technical safety~Before installation, check the cookerhood for visible signs of damage.Under no circumstances should youuse a damaged appliance. A dam

~Do not connect the appliance to themains electricity supply by amulti-socket unit or an extension lead.These do not guarantee the requiredsafety of t

In order to ensure safe operation, andto prevent gases given off by theheating appliances from being drawnback into the room when the cookerhood and t

Correct use~Never use an open flame beneaththe cooker hood. To avoid the dangerof fire, do not flambé or grill over anopen flame.When switched on, the

~Safety regulations prohibit the fittingof a cooker hood over solid fuel stoves.~All ducting, pipework and fittingsmust be of non-flammable material.T