Miele G 684 Betriebsanleitung PDF herunterladen (Seite 52)

Solving problems

Cleaning the water intake filter

A filter is incorporated in the intake

hose attached to the dishwasher’s shut

off valve. If your water is hard, or the

pipes contain sediment; this filter may

clog and prevent enough water from

entering the wash cabinet. It can be

cleaned as follows:

The plastic valve housing on the in

take hose contains electrical com

ponents and should not be im

mersed, or run through water.

Cleaning the filter:

Disconnect the dishwasher from

electricity (unplug it or “trip” the circuit

breaker).

^ Turn off the main shutoff valve and

unscrew the intake hose.

^ Carefully remove the rubber seal.

^ Remove the filter using needle nose

pliers and rinse under running water.

Return the filter and seal. Make sure

they are seated correctly.

^ Screw the intake hose back on the

water valve, checking that it is not

cross-threaded.

^ Slowly turn on the valve and test for

leaks.

Installing an in-line water filter

^ If your water contains a large number

of insoluble substances, a filter be

tween the valve and the intake hose

connection is recommended. These

filters can be purchased from the

Miele Technical Service Department.

Solving problems

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Keine Kommentare

Miele G 684 Betriebsanleitung Seite 52