Miele KM89-2 Betriebsanleitung PDF herunterladen (Seite 19)

Instructions for building-in

Stick the seal provided f under the

edge of the deep fat fryer.

b Appliance

c Tensioning screw

d Clamp

e Worktop

f Seal

Turn the tensioning screws c in the

clamps on the appliance

b in an

anti-clockwise direction until a resist-

ance is met and turn the clamps to

the left.

Place the appliance into position,

turn the clamps and tighten the ten-

sioning screws until the clamps

press into the worktop

e.

Connect the appliance to the elec-

tricity supply.

A gap the width of an appliance has

to be assured between a gas hob

and a deep fat fryer to avoid any

source of ignition.

When building-in several Combiset

units, a spacer bar must be fitted

between the units. It is supplied with its

own installation instructions.

loosen

tighten

Instructions for building-in

19

1 2 ... 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare