Miele G 1173 SCVi Betriebsanleitung PDF herunterladen (Seite 51)

Cleaning the water inlet filter

A filter is incorporated in the screw

connection of the valve on the water

inlet hose. The filter must be cleaned

when dirty, otherwise insufficient water

flows into the wash cabinet.

The plastic housing of the water

connection contains an electrical

component. It must not be dipped in

water.

Recommendation

If the mains water contains a large

amount of insoluble substances, we

recommend fitting a large-area filter in

the connection between the tap and the

water inlet hose threaded union. This

filter is available from the Miele Spares

Parts Department.

Cleaning the filter:

^ Disconnect the dishwasher from the

mains supply. Switch off at the mains

socket and withdraw the plug.

Close the tap.

Unscrew the inlet hose.

Carefully remove the seal.

^ Withdraw the filter using pointed

pliers and rinse clean under running

water.

^ Replace the filter and seal, making

sure they are sitting correctly.

^ Reconnect the inlet hose to the tap,

making sure it goes on correctly and

is not cross-threaded.

Turn on the tap gradually to test for

leaks. If there is a leak, the inlet hose

might not be on securely, or it may

have been screwed on at an angle.

Unscrew and reconnect the water

inlet valve correctly.

Maintenance

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Keine Kommentare

Miele G 1173 SCVi Betriebsanleitung Seite 51