Miele K 1813 Vi Installationshandbuch PDF herunterladen (Seite 59)

^ Mark the distance X on the back-side

of the custom door.

^ Also calculate and mark the center of

the custom door Y.

^ Remove the mounting frame from the

appliance door and position it

according to the markings on the

custom door.

Pre-drill the holes.

Tightly screw on the bracket using

the pre-drilled holes:

Attach the bracket to each

attachment point with at least one

screw.

Attach the bracket at the top with at

least 10 screws.

Please note: When attaching the

mounting frame onto two adjacent

doors (see "Front panel gap kit")

screw into the thicker outer frames

of the doors only.

The bracket includes a variety of holes

for the various design options of

custom doors.

When performing work on the custom

door, always observe the following:

–

Always select the best load-bearing

surface of the custom door as the

location for screws.

–

Always select a screw length that is

shorter than the thickness of the door

front.

Secure the door handle to the front of

the appliance from the inside.

Installing the appliance

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

Keine Kommentare

Miele K 1813 Vi Installationshandbuch Seite 59