Miele CS 1021 Bedienungsanleitung PDF herunterladen (Seite 56)

To check the first intake of air

a Adjusting screw

b Air intake sleeve

Gap X must measure:

For natural gas: 6 mm

For liquid gas: 13 mm

To set gap X

^ Loosen screw a and adjust air intake

sleeve b. Then retighten screw a.

To change the small jets

a Small diameter jet

(e.g. for liquid gas: 0.23)

b Large diameter jet

(e.g. for liquid gas: 0.60)

^ Using a small screwdriver, unscrew

the two small jets a and b in the gas

fitting.

^ Pull out the jets with a pair of pliers.

^

Fit the correct jets securely (see jet

table).

^

Finally, secure the jets against

inadvertent loosening with sealing

wax.

Conversion to another type of gas

56

1 2 ... 51 52 53 54 55 56 57 58 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare