Miele CS 1223 I Installationshandbuch PDF herunterladen (Seite 27)

Fit the wall units and extractor hood

before fitting the appliance to avoid

damaging the surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

This appliance may only be used in

mobile installations if a risk assessment

of the installation has been carried out

by a suitably qualified engineer.

After installation, ensure that the

connection cable is without hindrance

and that there is no mechanical

obstruction which could damage it,

such as a drawer.

If an interim shelf is installed under

the appliance, there must be a

minimum gap of 40 mm between the

top of the shelf and the underside of the

appliance.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by

hobs could damage the appliance

below.

The minimum safety distances given

on the following pages must be

observed.

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Keine Kommentare

Miele CS 1223 I Installationshandbuch Seite 27