Miele DA 371 Bedienungsanleitung PDF herunterladen (Seite 5)

Building in

Fit wall units and extractor hood

before fitting the hob, to avoid

damaging the appliance.

~

The veneer or laminate coating of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

~

Ideally the gas hob should be

installed with plenty of space on either

side. There may be a wall at the rear

and a tall unit or wall at one side. On

the other side, however, no unit or

divider should stand higher than the

hob (see illustrations).

~

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However it may be suitable for

such usage, subject to a risk

assessment of the installation being

carried out by a suitably qualified

engineer.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate, it is essential that a

minimum safety distance a of

150 mm is maintained between the

worktop cut-out and adjacent

furniture, e.g. a tall unit.

recommended

not recommended

not allowed

Safety instructions

5

1 2 3 4 5 6 7 8 9 10 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare