Miele KM 520 Bedienungsanleitung PDF herunterladen (Seite 38)

Protective shelf

After installing the hob, you need to

make sure that the underside of the

appliance cannot be accessed or

touched.

A panel and a protective shelf must be

fitted if:

– there is no oven underneath the

appliance

– the appliance is wider than the oven

–

the appliance and the oven are offset

from one another.

A minimum distance of 75 mm is

required between the upper surface of

the worktop and the protective shelf.

A gap of 10 mm must be maintained

between the shelf and the rear wall.

Sealant

Do not use any sealant unless

expressly instructed to do so. The

sealing strip under the edge of the top

part of the hob provides a sufficient

seal for the worktop.

Do not use sealant between the

frame of the top part of the hob and

the worktop.

This could cause difficulties if the

hob ever needs to be taken out for

servicing and possibly result in

damage to the hob frame or the

worktop.

Installation

38

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare