Miele S 5211 Betriebsanleitung PDF herunterladen (Seite 28)

Replacing an Active Air Clean

filter or an Active HEPA filter

Do not use more than one exhaust

filter at a time.

Open the dust compartment lid.

Raise the filter and remove it.

Replace it with a new Active Air

Clean filter or a new Active HEPA

filter and plress it down into place.

If you wish to replace the Active Air

Clean filter or the Active HEPA filter

with a Super Air Clean filter, see

"Replacing one type of exhaust filter

with another".

^ Close the dust compartment lid

firmly. It should click into place.

Re-setting the exhaust filter change

indicator

If your vacuum cleaner is fitted with an

exhaust filter change indicator, this

needs to be re-set each time the filter is

replaced. To do this the vacuum

cleaner must be switched on.

Press the reset button.

The exhaust filter change indicator

goes out and resets to zero.

The filter change indicator can only

be reset by pressing the reset

button after the light has come on.

Pressing the button at any other time

will have no effect.

Maintenance and care

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Keine Kommentare

Miele S 5211 Betriebsanleitung Seite 28