Miele KM 2012 Bedienungsanleitung PDF herunterladen (Seite 36)

Connection to the gas supply, or

conversion from one type of gas to

another should only be undertaken

by an approved gas fitter, who is

responsible for correct functioning

of the appliance when installed.

Every appliance should have its own

isolating valve.

The gas connection must be

installed so that connection can be

made either from inside or outside

the kitchen unit, and the isolating

valve must be easily accessible and

visible (by opening one of the

kitchen unit doors, if necessary).

Check with your local gas supplier

about the type of gas and its

calorific value, and compare this

information with the type of gas

quoted on the cooktop data plate.

This appliance is set up for connection

to natural gas.

See adhesive label on the appliance:

G = NG (natural gas)

LP = ULPG (Propane/Butane)

Jets are supplied for conversion to

ULPG (Propane/Butane) gas.

If the appropriate jets have not been

supplied with the appliance you will

need to contact your Chartered Agent

or Miele.

Conversion to another type of gas is

described under the relevant Section.

Gas connection

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Keine Kommentare

Miele KM 2012 Bedienungsanleitung Seite 36