Miele CVA 2662 Bedienungsanleitung PDF herunterladen (Seite 47)

The descaling cannot be interrupted

once the OK button has been

pressed. The process must be

allowed to run through to

completion.

This is a safety feature to ensure the

process will be completed.

Descaling is important to increase

the life of the machine and to ensure

the best results possible.

The display will guide you through the

descaling process. Follow the prompts

(for example, empty drip tray, fill water

tank, etc.).

Do not skip any steps or remove a

part unless prompted by the

display. This will cause the program

to fault and descaling will restart.

^ Remove the water tank and fill it to

the mark k with lukewarm water.

(Do not under fill the water tank, this

will cause the descaling process to

end prematurely.)

^

Add 2 descaling tablets to the

water. Allow the descaling tablets

dissolve completely, before closing

the lid and placing the water tank

back into the appliance.

^

When the message appears in the

display, remove the capsule plate

and replace it with the colored

descaling funnel.

^

Place the waste container under the

steam valve and coffee dispenser to

collect the waste water.

There will be at least 5 minutes

before the descaling process starts.

This time is needed for the

descaling tablets to completely

dissolve in the water. If the process

takes longer than 5 minutes to start,

the appliance is too warm.

During the descaling process, a small

amount of water and descaling agent

will exit the steam valve and coffee

dispenser. This is followed by an

activation period, before more

descaling agent is drained. A message

in the display will appear to let you

know approximately how long the

descaling process will take.

Descaling the coffee system

47

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare