Miele CS 1221 Betriebsanleitung PDF herunterladen (Seite 31)

Fit the wall units and rangehood

before fitting the appliance to avoid

damaging the surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However it may be suitable for

such usage subject to a risk

assessment of the installation being

carried out by a suitably qualified

engineer.

After installation, ensure that the

connection cable is without hindrance

and that there is no mechanical

obstruction which could damage it,

such as a drawer.

If an interim shelf is installed under

the appliance, there must be a

minimum gap of 40 mm between the

top of the shelf and the underside of the

appliance.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by the

cooktop could damage the appliance

below.

All dimensions in this instruction booklet

are given in mm.

This appliance must be installed

and connected to services in

accordance with local and national

safety and building regulations.

Safety instructions for installation

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Keine Kommentare

Miele CS 1221 Betriebsanleitung Seite 31