Miele CS1212 Bedienungsanleitung

Operating and InstallationInstructionsCeramic combiset with InductionCS 1212CS 1221To prevent accidents andmachine damage,read the Operating Manualbef

CS 1221a Burner with double boosterb Displayc Indicatorsd Control knobIndicatorsl On/Off indicatorm Booster indicatorn "Residual Heat" indic

Displayß = No pan on burner or pan is unsuitableA = Auto-heatF = Fault (see "Frequently asked questions")C / 0 = Safety cut-out feature (see

Clean the combiset^Before using for the first time, cleanthe appliance with a damp cloth anddry with a soft cloth.Do not use liquid dish soap to clean

How it worksAn induction coil is located under theburner. When the burner is switchedon, this coil creates a magnetic fieldwhich impacts directly on t

NoisesWhen using an induction burner, thefollowing noises can occur in the pan,depending on what it is made of andhow it is constructed.–Higher power

CookwareSuitable pans include:–stainless steel pans with a magneticbase–enameled steel pans–cast iron pansUnsuitable pans:–stainless steel pans withou

Turning the combiset On/Off,Do not leave the applianceunattended while in use.To turn the combiset on turn the controlknob clockwise a to the desired

SettingsUse for Power level*Melting butter, chocolate, etc.Dissolving gelatinPrepare yogurt1-2Warming small quantities of food or liquidKeeping delica

Auto-heatWhen Auto-heat has been activated,the burner switches on automatically atthe highest setting and then switches tothe continued power level wh

Booster functionThe burner is equipped with a boosterfunction to temporarily increase thepower level. This boost is intended toquickly bring large qua

IMPORTANT SAFETY INSTRUCTIONS...4Description of the unit...9CS 1212 ...

Keep warmThis function can be used for keepingfood warm right after it has beencooked. It is not for reheating foodwhich has already cooled.Once activ

Child Safety LockKeep children away from thecombiset for their own safety.The combiset has a Child Safety Lockto prevent children from turning on theb

Overheating protectionThe induction coils and the coolingelement of the electronics are fitted withan overheating protection feature. Thisprevents the

Do not use a steam cleaner to cleanthis appliance. Steam couldpenetrate electrical components andcause a short circuit. Pressurizedsteam could cause p

Stainless steelClean stainless steel surfaces withwarm water and liquid dish soapapplied with a non-abrasive spongeand then wipe dry with a soft cloth

,Repairs should only be carried out by an authorized technician inaccordance with local and national safety regulations. Unauthorized repairscould cau

What if the combiset turns itself off automatically?Possible fault SolutionEither the "Safety cut-out" feature or the"Overheating prote

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this bo

28

Installation InstructionsIMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USETo prevent accidentsand machine damageread these instructionsbef

SAFETY INSTRUCTIONS FOR INSTALLATION...30Installation ...33Installation dimen

Note to the installer:Please leave this instruction bookwith the consumer for the localelectrical inspector’s use.The minimum distances given inthese

Safety distances above theapplianceThe minimum safety distance given bythe hood manufacturer must bemaintained between the combiset andthe hood above

Safety distances to the sidesof the applianceThe appliance should only be installedas shown in the illustrations, whilemaintaining the required safety

Safety distance when installing the appliance near a wall with trim or a backsplashA minimum distance of 2" (50 mm) between the trim or back spla

Installation dimensionsCS 1212a Spring clipsb Appliance frontc Installation heightd Power supply box with connection cableInstallation34

CS 1221a Spring clipsb Appliance frontc Installation heightd Power supply box with connection cableInstallation35

Cut out^Make the worktop cut-out for one ormore appliances as applicable.Remember to maintain a minimumsafety distance from the back wall,as well as f

Installation of multipleappliancesWhen installing more than one combiset appliance, a support bar b must beinstalled between the appliances.Countertop

Sample calculations for a countertop cut-out for three appliancesAappliance widthminus5/16"(8mm)Bappliance widthCappliance widthminus5/16"(8

a Spring clipsb Support barsc Space between support bar and countertopAn additional support bar is required for each additional appliance. The positio

WARNING- When using yourappliance follow basicprecautions, including thefollowing:Read all instructions beforeinstallation or use to preventinjury and

Attach the spring clips andsupport barsWood or solid surface countertops^Place the supplied spring clips aand the support bars b at themarked position

^Coat the edges of the spring clips a,^and the space d between thestrips b and the countertop withsilicone (supplied).Installation41bda

Installing the appliance^Feed the power cord down throughthe cut-out.^Then place the front side of theappliance in the countertop cut-out.^Then with a

SealingThe appliance must not be permanentlysealed into the countertop wheninstalled. The sealing strip under theedge of the appliance provides asuffi

,CAUTION: Before installation orservicing, disconnect the powersupply by either removing the fuse,shutting off the main power supplyor manually "

Disposal of packing materialsThe cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle.Ensure that any plastic wrappings,

46

47

Alteration rights reserved / 4608For the most updated manual see the Miele web site.M.-Nr. 07 353 950 / 00

Technical Safety~Installation, repair and maintenancework should be performed by a Mieleauthorized service technician. Work byunqualified persons coul

~Do not cook on a broken combiset.Any breakages or cracks in the ceramicsurface of the appliance are defectsand must be treated as such. If thecombise

~Do not store items on the appliancewhen not in use. Items could melt orcatch fire from residual heat or if theappliance is turned on inadvertently.Al

~Pot and pan handles should beturned inward and not extend over thecountertop to reduce the risk of burns,ignition of flammable materials, andspills.~

CS 1212a Burner with double booster (BI/II)b Burner with single booster (BI)c Displayd Cooking zone indicatorse IndicatorsControl knobs for the burner