Miele KM 453 Betriebsanleitung PDF herunterladen (Seite 32)

Fit the wall units and rangehood

before fitting the cooktop to avoid

damaging the surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

This appliance must not be installed

and used in mobile installations such as

ships etc.

After installation, ensure that the

connection cable is without hindrance

and that there is no mechanical

obstruction which could damage it,

such as a drawer.

If an interim shelf is installed under

the appliance, there must be a

minimum gap of 40 mm between the

top of the shelf and the underside of the

appliance.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by the

cooktop could damage the appliance

below.

Observe carefully the safety

distances given on the following pages.

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Keine Kommentare

Miele KM 453 Betriebsanleitung Seite 32