Miele KM 5670 Bedienungsanleitung PDF herunterladen (Seite 42)

... the food in the pan hardly heats up

or does not heat up at all when the

Auto heat-up function is switched on

This could be because:

–

there is too much food in the pan.

–

the pan is not conducting heat

properly.

Select a higher continued cooking

setting next time, or start cooking at the

highest setting and then turn down to a

lower setting manually later on.

... it is taking too long for the

contents of the pan to come to the

boil

You can test the power level of the

cooking zone (see "To test the power

level").

... one or more residual heat

indicators are flashing

–

There was an interruption to the

power supply during operation, and

the hob has switched itself off.

The hob can be used again as normal.

Check the cooking stage of the food

and whether its condition has been

affected by the power failure before

switching the cooking zone(s) back on

again.

–

The residual heat indicators have lit

up during programming.

... numbers light up in the Timer

display, and A, F and numbers light

up in the cooking zone display, when

the hob is switched off.

The sensitivity level of the sensors has

altered and they are unable to

recalibrate automatically. The sensors

must be recalibrated manually (see

"Calibrating the sensor switches").

If this does not solve the problem,

please call the Miele Customer Contact

Centre.

... an F appears in the display for the

left hand cooking zones, an E

appears in the display for the right

hand cooking zones and numbers

appear in the timer display.

Interrupt the power supply to the hob

for approx. 1 minute.

If the problem persists after

reconnecting the appliance to the

power supply, please contact the Miele

Customer Contact Centre.

Problem solving guide

42

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare