Miele KM3010 Handbuch

Operating and installation instructionsGas hobsKM 3010KM 3014To avoid the risk of accidents ordamage to the appliance it isessential to read theseinst

Safety with children~This appliance is not a toy! To prevent the risk of injury, do notallow children to play with the appliance or its controls.~Chil

Technical safety~Before installation, check the appliance for visible signs ofdamage. Do not install and use a damaged appliance. A damagedappliance m

~Never open the outer casing of the appliance. Tampering withelectrical connections or components and mechanical parts ishighly dangerous to the user

~Do not connect the appliance to the mains electricity supply by amulti-socket adapter or an extension lead. These do not guaranteethe required safety

~Do not flambé under a cooker hood. The flames could set thecooker hood on fire.~For added protection, it is advisable to use heat-resistant potholder

~Ensure that the flames from the burner do not spread out beyondthe base and up the sides of the pan.~Unless the pan manufacturer states that you can

~Spray canisters, aerosols and other inflammable substances mustnot be stored in a drawer under the hob. Cutlery inserts must beheat-resistant.~Always

Disposal of the packingmaterialThe transport and protective packinghas been selected from materialswhich are environmentally friendly fordisposal and

Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the "Aftersales service, data plate&

ControlsThe control is used to ignite the burner and to regulate thestrength of the flame.Small, medium and large burnersß The gas supply is turned of

G This appliance can be used in countries other than those specified on theappliance. It is, however, set up for connection to the gas and electricity

Switching on^The control for the burner required must be pressed in andturned anti-clockwise to the largest flame symbol to switchon.When a control is

Regulating the flameRegulate the flame so that it does not spread out beyond thesides of the pan. As the outer part of the flame is much hotterthan th

Burner Min. pan base diameter in cmSmall burnerMedium burnerLarge burnerWok burner10121414Max. diameter at top of pan in cmSmall burnerMedium burnerLa

Combi insertThe combi insert must be utilised when using pans with abase diameter of less than the minimum given in the tableabove. The combi insert e

–Use a pan lid whenever possible to minimise heat loss.–Cook with as little water as possible.–Cooking times are greatly reduced when using a pressure

Thermo-electric ignition safety deviceThis appliance is has a thermo-electric ignition safety device.If the flame goes out, for example if food has bo

,Do not use a steam cleaning appliance to clean thisappliance. The steam could reach electrical componentsand cause a short circuit.–The appliance sho

Cleaning InstructionsCeramic surface Wipe all coarse soiling off using a damp cloth.Stubborn soiling may need to be removed with ashielded scraper bla

To assemble the small, medium and large burners^ Place the burner head b on to the burner base c so thatthe ignition safety device d and the ignitor e

To assemble the wok burner^ Place burner head c onto burner base d so that theignition safety device e and the ignitor f extend throughtheir respectiv

Gas-heated appliancesSafety precautions to take if you smell gasß Turn off the gas emergency control valve immediately.This is usually located near th

With the help of the following notes, minor faults in the performance of theappliance, some of which may result from incorrect operation can be put ri

Miele offer a comprehensive range of useful accessories aswell as cleaning and conditioning products for yourappliance.These products can be ordered o

Fit the wall units and extractor hoodbefore fitting the hob to avoiddamaging the surface.~The veneer or laminate coatings ofworktops (or adjacent kitc

Safety distance above the applianceA minimum safety distance must bemaintained between the appliance andthe cooker hood above it. See thecooker hood m

Safety distances to the sides of thehobIdeally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear or a tal

KM 3010a Frontb Casing depthc Casing depth including mains connection boxd Gas connection R 1/2 - ISO 7-1 (DIN 10226)Appliance and building-in dimensi

KM 3014a Frontb Casing depthc Casing depth including mains connection boxd Gas connection R 1/2 - ISO 7-1 (DIN 10226)Appliance and building-in dimensi

^Make the worktop cut-out accordingto the dimensions given in thebuilding-in dimension diagram.Remember to maintain the minimumsafety distances (see &

Seal between appliance andworktopThe sealing strip under the edge of thetop part of the appliance provides asufficient seal for the worktop.The applia

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regula

Description of the appliance...5KM 3010...5KM 3014...

ImportantThe electrical safety of this appliancecan only be guaranteed if correctlyearthed. It is most important that thisbasic safety requirement is

,Connection to the gas supply, orconversion from one type of gas toanother, should only be undertakenby an approved and registered gasinstaller in str

ConnectionThe gas connection must be installedso that connection can be made eitherfrom inside or outside the kitchen unit,and the isolating valve mus

Nominal ratingBurner Gas type High setting Low settingkW g/h kWSmall burner Natural gas HLiquid gas1.00.95-690.250.20Medium burner Natural gas HLiquid

,Connection to the gas supply, or conversion from onetype of gas to another, should only be undertaken by anapproved and registered gas installer in s

Changing the jetsDisconnect the gas hob from the mains electricity supply.Turn off the gas supply.To change the main jetsSmall, medium and large burne

Wok burner^ Remove burner cap ab and burner head c.^Using an M7 socket spanner, unscrew the main jet d^Fit the correct jets securely (see jet table).^

To change the small jetsTo change the small jets, the burner securing screws mustfirst be loosened and the upper section of the applianceremoved.^Pull

Function testCheck all gas fittings for leaks.^Reassemble the appliance.^Check the burner flame by operating the burner.The flame must not go out on t

In the event of any faults which you cannot remedy yourself, please contact:–your Miele dealer, or–Miele (see back cover for contact details).Please n

KM 3010a Large burnerb Small burnercd Medium burnerse Pan support (for each burner)f Cooking zone symbolCooking zone controls:g Front righth Rear righ

50

51

Alteration rights reserved / 4212M.-Nr. 09 168 420 / 02

KM 3014a Wok burnerb Small burnerc Medium burnerd Pan support (for each burner)e Cooking zone symbolCooking zone controls:f Front rightg Rear righth L

Burner Wok burnera Outer burner capb Inner burner capc Burner headd Burner basee Ignition safety devicef IgnitorSmall, medium and large burnersa Burne

Accessories suppliedThe accessories supplied with your appliance as well as arange of optional ones are available to order from Miele (see"Option

This appliance complies with all relevant local and national safetyrequirements. Inappropriate use can, however, lead to personalinjury and damage to