Miele S 5211 Betriebsanleitung PDF herunterladen (Seite 32)

When to change the thread

lifters

The thread lifters on the suction inlet of

the floorhead and the upholstery nozzle

can be replaced.

Check them from time to time if the pile

has worn down.

To replace the thread lifters

Use a knife or similar object to

remove them from the slots.

Fit new thread lifters.

Upholstery nozzle, 190 mm

^ Disengage the thread lifter unit at

each side of the upholstery nozzle

using a coin.

^ Fit a new thread lifter unit and lock

into position.

If thread or hair has wound around

the bearing on the floorhead roller

a Release the bearing (with bayonet

fitting) using a coin.

b Press the bearing out, and remove.

c Take out the roller.

Remove any threads and hair, replace

the roller and refit the bearing.

Replacement parts are available from

your Miele dealer or from the Miele

Spare Parts Department (see back

cover for contact details).

Maintenance and care

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Keine Kommentare

Miele S 5211 Betriebsanleitung Seite 32