Miele KM6322 Handbuch

Operating and installation instructionsCeramic hobs with inductionKM 6322 / KM 6323KM 6347 / KM 6348To avoid the risk of accidents ordamage to the app

Correct use~Oil and fat can overheat and catch fire. Do not leave theappliance unattended when cooking with oil or fat. If oil or fat doescatch fire,

~If the appliance is installed behind a kitchen furniture door, it mayonly be used with the furniture door open. Do not close the doorwhilst the hob i

~Do not use pots or pans on the hob with bases with pronouncededges or ridges. These could scratch or scour the ceramic glasssurface permanently. Only

~Metal utensils stored in a drawer under the hob can become hot ifthe induction hob is used intensively for a long time. Do not storeany metal items o

ModelsKM 6322 / KM 6323ab Cooking zones with Boosterc PowerFlex cooking zone with TwinBooster, can be combined withd to form a PowerFlex cooking area.

KM 6347 / KM 6348ab Cooking zones with Boosterc PowerFlex cooking zone with TwinBooster, can be combined withd to form a PowerFlex cooking area.d Powe

Control panelSensor controlsa On/Offb Numerical keypad- For setting the power level- For setting the timec Safety lockd Booster/TwinBoostere For selec

Indicator lightsi Safety lockj BoosterCooking zone displaysk0 = Cooking zone ready for use^ = Keeping warm function1 to 9 = Power levelsf = Level 1 Tw

Cooking zonesCookingzoneKM 6322 / KM 6323Minimum to maximumC in cm*Rating in watts for 230 V**y 14–20 NormalBooster18503000w 10–16 NormalBooster140022

CookingzoneKM 6347 / KM 6348Minimum to maximumC in cm*Rating in watts for 230 V**y 16–23 NormalTwinBooster level 1TwinBooster level 2230030003700w 10–

2

Disposal of the packingmaterialThe transport and protective packinghas been selected from materialswhich are environmentally friendly fordisposal and

Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the "Aftersales service, data plate,

The induction principleAn induction coil is located under each cooking zone. Whena cooking zone is switched on, this coil creates a magneticfield whic

NoisesWhen using an induction cooking zone, the following noisescan occur in the pan, depending on what it is made of andhow it has been constructed.–

PansSuitable pans include:–stainless steel pans with a magnetic base–enamelled steel pans–cast iron pansUnsuitable pans:–stainless steel pans without

The appliance is delivered with 9 power levels programmed as standard. If youwish to fine-tune a setting, you can extend the power level range (see&qu

How the hob is operatedThe hob is equipped with electronic sensor controls whichreact to finger contact.To operate the hob, touch the relevant sensor.

Fire hazard.Do not leave the appliance unattended whilst it is beingused.To switch the hob on^Touch the s sensor.0 will appear in each of the cooking

Altering the power level^Touch the sensor for selecting the cooking zone you want.The power level will flash in the cooking zone display.^Set the powe

Auto heat-upWhen Auto heat-up has been activated, the cooking zoneswitches on automatically at the highest power setting andthen switches to the conti

Warning and Safety instructions ...5Guide to the appliance ...14Models ...

Continuedcooking setting*Heat-up timein minutes and seconds (approx.)1 0:151. 0:152 0:152. 0:153 0:253. 0:254 0:504. 0:505 2:005. 5:506 5:506. 2:507 2

BoosterThe cooking zones are equipped with a Booster orTwinBooster (see "Guide to the appliance").When activated, the power is boosted for a

To switch on the Booster^Touch the sensor for selecting the cooking zone you want.^Select a power level if you wish.^Touch the B I/II sensor.The indic

Keeping warm functionEach cooking zone has a keeping warm function "h". The "h"function is inbetween the "0" setting and

Switching off and residual heat indicatorsSwitching off a cooking zone^Touch the sensor for selecting the cooking zone you wanttwice.A 0 will flash in

–Use a pan lid whenever possible to minimise heat loss.uncovered covered–Select a smaller pan when cooking small quantities. Asmaller pan uses less en

The hob must be switched on to use the timer.The timer can be used for two different functions:–to set the minute minder–to set a cooking zone to swit

To switch a cooking zone off automaticallyYou can set a time at the end of which a cooking zone willswitch off automatically.All the cooking zones can

To use both timer functions at the same timeThe minute minder and automatic switch-off functions can beused at the same time.If you have programmed in

Safety lock / System lockKeep children away from the hob for their own safety.Your appliance is equipped with a safety lock to prevent thehob and the

Overheating protection ...43Cleaning and care ...44Programming

ActivatingThree-finger operation (standard default setting)^Touch the $ sensor and the sensors for selecting bothright-hand cooking zones at the same

Stop and GoYour appliance has a Stop and Go feature which, whenactivated, reduces the power of all cooking zones in use topower level 1. When Stop and

Safety switch-offSafety switch-off with an over-long cooking timeIf one of the cooking zones is heated for an unusually longperiod of time (see chart)

Overheating protectionAll the induction coils and the cooling elements for theelectronics are fitted with an overheating protectionmechanism. Before t

Danger of injury.Do not use a steam cleaning appliance to clean thisappliance. The steam could reach electrical componentsand cause a short circuit.Th

Do not use washing-up liquid to clean the ceramic surface.Washing-up liquid will not remove all soiling and deposits.It will form an invisible coating

You can change the default settings of the programmeoptions (see chart). Several settings can be altered insuccession.After selecting programming mode

To save settings^Touch the s sensor until all the displays go out.To not save settings^Touch the $ sensor until all the displays go out.Programming47

Programme* Status** SettingP00Demonstrationmode andfactory defaultsettingsS 0 Demonstration mode on(after the hob is switched on, "dE" willa

Programme* Status** SettingP06Safety lock S 0 One-finger locking using $S1 Three-finger locking by touching$ and the sensors for selectingthe right-ha

This appliance complies with all relevant safety requirements.Inappropriate use can, however, lead to personal injury anddamage to property.To avoid t

With the help of the following notes, minor faults in the performance of theappliance, some of which may result from incorrect operation can be put ri

Problem Possible cause RemedyA smell and vapoursare given off when anew appliance isbeing used.The smell and vapours willbe less noticeable witheach s

Problem Possible cause RemedyPower level 9 isautomatically reducedif you select powerlevel 9 on two linkedcooking zones orextended zones at thesame ti

Problem Possible cause RemedyThe sensors areover-sensitive or donot react at all.The sensitivity level ofthe sensors haschanged.Make sure that there i

Miele offer a comprehensive range of useful accessories aswell as cleaning and conditioning products for your Mieleappliances.These can be ordered onl

Miele|home systemThe Miele{home system allows communication-enabledappliances to send operating and status information to adisplay appliance via the h

Miele|homea Communication enabled appliances (examples)b Communication modulec SuperVision applianced Electrical supply (Powerline)e Miele|home Gatewa

Con|ctivitya Communication module XKM 2000 DAb Communication module XKM 2100 KMc Electrical supply (Powerline)Optional accessories57

Signing on the hobIf you want to sign the hob–on to the Miele{home system, first prepare the signing onprocedure on the master appliance (see the &quo

Signing off the hobIf you want to sign off from the Miele{home system, firstprepare the signing off procedure on the master appliance(see the "Mi

Correct application~This hob is not designed for commercial use. It is intended foruse in domestic households and similar working and residentialenvir

The appliance must only be installedand connected to the electricitysupply by a suitably qualified andcompetent person in strictaccordance with curren

Safety distance above the applianceA minimum safety distance must bemaintained between the appliance andthe cooker hood above it. See thecooker hood m

Safety distances to the sides andback of the hobIdeally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear

Safety distances underneath the hobTo ensure sufficient ventilation to thehob, a certain gap must be left betweenthe underside of the hob and any oven

Safety distance when installing the appliance near a wall with additionalniche claddingA minimum safety distance must be maintained between the workto

Installation notesSeal between the hob and theworktopDo not use sealant between the hoband the worktop. This could result indamage to the hob or the w

Building-in dimensionsKM 6322a Frontb Casing depthc Connection for Miele|homed Mains connection boxThe mains connection cable (1440 mm long) is suppli

KM 6347a Frontb Casing depthc Connection for Miele|homed Mains connection boxThe mains connection cable (1440 mm long) is supplied separately.Hob with

Installing the hobPreparing the worktop^Make the worktop cut-out accordingto the dimensions given in thebuilding-in diagram. Remember tomaintain the m

Building-in dimensionsKM 6323a Frontb Casing depthc Connection for Miele|homed Stepped cut-out for granite or marbleworktopse Mains connection boxThe

Safety with children~Children under 8 years of age must be kept away from theappliance unless they are constantly supervised.~Children 8 years and old

KM 6348a Frontb Casing depthc Connection for Miele|homed Stepped cut-out for granite or marbleworktopse Mains connection boxThe mains connection cable

Installing the hobFlush fit hobs are only suitable forinstallation in granite, marble, tiled orsolid wood worktops.When using a worktop made fromany o

Granite and marble worktopsPreparing the worktopa Worktopb Hobc GapAs the ceramic glass and theworktop cut-out have a certaindimensional tolerance, th

Solid wood, tiled and glassworktopsPreparing the worktopa Worktopb Hobc Gapd Wooden frame 13 mm(to be provided on site)As the ceramic glass and thewor

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regula

The electrical safety of this appliancecan only be guaranteed whencontinuity is complete between it andan effective earthing system, whichcomplies wit

In the event of any faults which you cannot remedy yourself, please contact:–your Miele dealer, or–Miele (see back cover for contact details).Please n

77

78

79

Technical safety~Installation, maintenance and repair work may only be carried outby a suitably qualified and competent person in strict accordancewit

Alteration rights reserved / 4212M.-Nr. 09 524 040 / 00

~While the appliance is under guarantee, repairs should only beundertaken by a service technician authorised by Miele. Otherwisethe guarantee is inval