Miele KM 2256 Bedienungsanleitung PDF herunterladen (Seite 30)

This appliance must be installed and

connected to services in

accordance with local and national

safety and building regulations.

Fit wall units and extractor hood

before fitting the hob to avoid

damaging the surface.

~

The room in which the gas hob is

installed must be at least 51 m

3

in size

with a door or window in it which can

be opened to the outside air.

~

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

~

This equipment may only be used in

mobile installations such as ships,

caravans, aircraft etc. if a risk

assessment has been carried out by a

suitably qualified engineer.

~

An electric fryer must not be

installed directly next to a gas hob, as

the gas flames could ignite the fat in the

fryer. It is essential to maintain a

distance of at least 300 mm between

these two appliances.

~

A gas hob may not be built in over a

fridge, fridge freezer, freezer,

dishwasher, washing machine or

tumble dryer.

~

Ensure that the gas pipe and

electrical cable are installed in such a

way that they do not touch any parts of

the appliance which become hot. This

could cause damage.

~

The electrical cable and a flexible

gas connection pipe must be installed

in such a way so that they do not come

into contact with any moving kitchen

parts (e.g. a drawer), and cannot

become trapped.

~

Observe carefully the safety

distances given on the following pages.

~

Do not use any sealant except

where expressly instructed to do so.

The seal underneath the appliance

provides a sufficient seal for the

worktop (see "Sealant").

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare